home 占쏙옙占싹븝옙占쏙옙占쏙옙 占쏙옙占쏙옙트占쏙옙 占쏙옙占쏙옙트占쏙옙

• Home > 제품소개

•  GAMBIT
•  NICHIAS
•  VALQUA VALQUA
•  GARLOCK
•  KLINGER
•  FRENZELIT
•  DONIT TESNIT
•  TEADIT
•  NICHIAS

 
다음카페
회사소개서 다운로드
 

Products List

BLUE-GARD 3000   <<
BLUE-GARD 3200   제품보기
BLUE-GARD 3400   제품보기
GYLON 3500   제품보기
GYLON 3504   제품보기
GYLON 3510   제품보기
GYLON 3540   제품보기
GYLON 3545   제품보기

GARLOCK BLUE-GARD 3000

MATERIAL PROPERTIES *

TYPICAL PHYSICAL PROPERTIES *

SEALING CHARACTERISTICS *
ASTM F37B
Fuel A
ASTM F37B
NitrogenA
DIN 3535- 4
Gas Permeability
Gasket Load, psi (N/mm2): 500 (3.5) 3000 (20.7) 4640 (32)
Internal Pressure, psig (bar): 9.8 (0.7) 30 (2) 580 (40)
Leakage 0.2 ml/hr. 0.6 ml/hr. 0.05 cc/min

IMMERSION PROPERTIES*- ASTM F146 Fluid Resistance after Five Hours
ASTM #1 Oil
300°F (150°C)
ASTM IRM #903
300°F (150°C)
ASTM Fuel A
70-85°F (20-30°C)
ASTM Fuel B
70-85°F (20-30°C)
Thickness Increase, (%) 0-5 0-15 0-5 0-10
Weight Increase, (%) <8 <20 <8 <15
Tensile Loss, (%) - <35 - -

Notes :
This is a general guide and should not be the sole means of selecting or rejecting this material. ASTM test results in accordance with ASTM F-104; properties based on 1/32" (0.8mm) sheet thickness unless otherwise mentioned.
* Values do not constitute specification Limits
1 See Garlock chemical resistance guide.
2 Based on ANSI RF flanges at our preferred torque. When approaching maximum pressure, continuous operating temperature, minimum temperature or 50% of maximum PxT, consult Garlock Applications Engineering. Minimum temperature rating is conservative.
3 Indicates current arced around and not through gasket. Dielectric higher than indicated.
4 A9: Leakage in Fuel A (Isooctane), Gasket Load = 500psi (3.5N/mm2), Pressure = 9.8psig (0.7bar): Typical = 0.2ml/hr, Max = 1.0ml/hr. A9: Leakage in Nitrogen, Gasket Load = 3,000psi (20.7N/mm2), Pressure = 30psig (2bar): Typical = 0.6ml/hr, Max = 1.5ml/hr.